Flux core welding wire 71T-GS 0.9mm, 30lb Spool gasless weld wire

Offers extremely high operator appeal in applications involving thin gauge galvanized or carbon steels. Arc action is smooth and stable, excellent at low welding currents. DCEN ( straight polarity) operation facilitates the welding of sections as thin as 18 gauge with little tendency for burn through. Good wetting action makes it well suited for the lap and butt joint welds encountered in body panel and sheet metal duct work. With vertical down welding, bead geometry and appearance are excellent; spatter levels are low. Well suited for use in portable welding systems, as the small diameters perform well on portable 110 volt input welding machines. It is recommended only for single pass welding and can be used in all positions using no shielding gas.

 

Features:

• uses DCEN (straight polarity), minimizing burn-through

• designed specifically for welding thin gauge galvanized steels

• single pass weldments on galvanized and carbon steel sheet metal from 18 gauge up to 3/16"

• very smooth arc, minimal spatter when applied to carbon steel

• manufactured under a quality system certified to ISO 9001 requirements.

Specification:

• Tensile Strength: transverse 87,000 psi