Arc Welding Electrodes 6010 1/8, 50lbs weld rods, welding sticks

Good arc welding stability, light slag and excellent wash-in. It is particularly valuable for out-of-position applications.

 

Features:

• Truly all-purpose weld rods: Particularly good for vertical and overhead

• Light slag with little slag interference for easy arc control

• Deep penetration with maximum admixture

• manufactured under a quality system certified to ISO 9001 requirements.

Benefits:

• Appearance: Flat beads have distinct ripples

Specification:

• TYPICAL MECHANICAL PROPERTIES - As Welded

• Tensile Strength: 60-76,000 psi

• Yield Point: 48-65,000 psi

• Elongation: 22-23%

• CVN @ -20°F: 20-55 ft-lbs

• Hardness, Rockwell B (avg): 78-85

•  

• TYPICAL MECHANICAL PROPERTIES: Stress Relieved @ 1150°F

• Tensile Strength: 60-69,000 psi

• Yield Strength: 48-61,000 psi

• Elongation: 28-36%

• CVN @ 70°F: 79 ft-lbs

Application:

• Made especially for welding carbon steel

• General purpose fabrication and maintenance welding

• Vertical-up and overhead plate welding

• Capable of x-ray quality welds out-of-position

• Pipe welding-cross country, in-plant, and non-critical small diameter piping

• Joints requiring deep penetration such as square edge butts

• Sheet metal edge, corner, and butt welds