| | |
|
| |
| | |
|
- Abrasives: Abrasive Cut-Off Wheels, Abrasive Grinding Discs, Abrasive Flap Discs
- Demolition Tools: Demolition Agent, Rock Drill, Demolition Hammer Breaker, Jackhammer
- Diamond Tools: Diamond Cutting, Drilling, Grinding, Polishing, Wire Saw, CNC Tools
- CNC Tools, CNC Finger Bits, CNC Core Bits, Profile Wheels, Router Bits
- Diamond Cutting Tools, Diamond Saw Blades
- Diamond Drilling Tools: Core Bits, Core Drill Bits, Core Drilling
- Diamond Grinding Tools, Diamond Cup Wheels
- Diamond Polishing Tools: Polishing Pads for Marble, Granite, Onyx
- Diamond Profiling Tools: Profile Wheels, Router Bits
- Diamond Wire, Quarry Stone Sawing Machine Diamond wire
- Ornamental Iron Fence Supply, Decorative Iron Works
- Home Iron Decor, Decorative Iron Works
- Ornamental Cast Iron Fence Finials, Spears, Collars - 1/2" Round
- Ornamental Cast Iron Fence Finials, Spears, Collars - 1/2" Square
- Ornamental Cast Iron Fence Finials, Spears, Collars - 3/4" Square
- Ornamental Cast Iron Fence Finials, Spears, Collars - 5/8" Round
- Ornamental Cast Iron Fence Finials, Spears, Collars - 5/8" Square
- Ornamental Cast Iron Fence Post Caps
- Ornamental Iron Fence, Iron Gate Accessories: Hinges
- Welding Supply, Welding Consumable: Welding Electrodes, MIG Welding Wire
- Wire Mesh, Sheet Metal, Perforated Metal, Expanded Metal, Wire Cloth
|
|
Home > Diamond Blade: Diamond Blade Safety
| | |
|
Important Diamond Blade Safety information
 IMPORTANT SAFETY INFORMATION on Diamond Blades
Diamond blades work under high speed rotation.
Improper operation may cause Diamond Blade breakage or serious injury.
DO:
-
-
Visually inspect all diamond blades before mounting for possible damage.
-
Make sure operating speed of machine. Do not exceed speed marked on the diamond blade.
-
Check mounting flanges for equal size, relieved as required and correct diameter.
-
Use mounting blotters as required by ANSI standards.
-
Use safety guard that covers a minimum half of diamond blade.
-
Allow newly mounted diamond saw blade to run at operating speed for at least one minute.
-
Wear safety glasses, gloves and necessary protection equipments.
-
Turn off coolant before stopping cutting to avoid creating an out-of-balance diamond blade.
-
Follow common sense safety considerations.
DO NOT:
-
Do not use a diamond blade that has been dropped or appears to have been abused.
-
Do not force a diamond blade onto machine or alter size of the mounting hole.
-
Do not exceed maximum operating speed.
-
Do not use mounting flange on which bearing surface is not clean, flat, smooth.
-
Do not tighten mounting nut excessively.
-
Do not use on any machine that is not properly designed for application of the diamond blade.
-
Do not jam working object into diamond blade.
-
Do not stand directly in front of running machine.
-
Do not use on material which is not designed for.
-
Do not touch a diamond blade just been used since it might be very hot.
* Sefety rules apply to all Diamond Saw Blades, including: General Purpose Diamond Blades, Segmented Diamond Blades, Turbo Rim Diamond Blades, Continuous Rim diamond blades, Reinforced Concrete Cutting Diamond Blades, Cured Concrete Cutting diamond blades, green concrete cutting diamond blades, asphalt cutting diamond blades, hard stone cutting diamond blades, granite cutting diamond blades, marble cutting diamond blades.
| |
| | |
|
|
|